Home Motor Yachts Sportfish Express Trawlers SailBoats Catamarans Cruisers Commercial Contact Us

Yacht Information


Yacht ID# - 249078
LOA: 66' 0" (20.12m)
Year: MFG:2015 / Model:2015
Builder: GUNBOAT
Model: Gunboat 66
Category: Catamaran
Location: Fort Lauderdale, Florida
United States (Florida - S.E.)
Price: $2,750,000 USD
Information Details Photos Video Print Listing Send Email
Dimensions
LOA: 66' 0" (20.12m)
LWL: 62' 0" (18.90m)
LOD: - -
Beam: 28' 3" (8.61m)
Min Draft: 2' 3" (0.69m)
Max Draft: 15' 9" (4.80m)
Clearance: - -
Weight
Displacement: - -
Gross Tonnage: -
Ballast Weight: - -
Ballast Material: -
Approximate Capacities and Speed
Max Speed: - -
Cruise Speed: - -
Fuel Consumption: - -
Fuel Capacity: 75 gal (283.9058835 L)
Water Capacity: 100 gal (378.541178 L)
Holding Tank: - -
Fuel and Water Tank Material
Fuel Tank Material: -
Water Tank Material: -
Hull and Deck Information
Hull Material: Composite
Deck Material: -
Hull Configuration: -
Hull Color: -
Hull Finish: -
Hull Designer: -
Interior Designer: -
Exterior Designer: -
Hull ID: -
Project Manager: -
Engine Information
Engine Manufacturer: Volvo
Engine Model: D2-40 Hybrid Drive
Engine Type: -
Engine Fuel Type: Electric
Propulsion Type: -
H.P. Year D/H Reg. Condition O.H. Hrs. O.H. Date Serial #
Engine 40 - - Used - - -
Contact a Broker
Please choose the office where you would like to send your query:
Fill out the following information ( * Required entries)
* First Name:
Last Name:
* Email:
Phone:
Comments:

Thank you for your interest, a representative will be in touch with you soon!

Sorry, but your email could not be sent.
Please make sure all fields are filled in correctly and try again in a couple of minutes

Manufacture Provided Description

Overview

Extreme H2O is the lightest and fastest Gunboat 66. The boat features a fully integrated hybrid system, C foils, T rudders, a Southern Spars rotating wing spar, aft beam traveler, retractable propeller drives, tiller steering for racing and push button mainsheet controls at all steering stations. 

State-of-the-art Morrelli & Melvin foils and a powerful sail plan with masthead screecher that sheets to the forward cockpit for light air upwind performance and a full inventory of downwind furling sails make “H2O” an extremely capable catamaran in a large crossover of wind conditions. Speed and performance did not sacrifice the luxury features of this cruising catamaran - which can realize up to 30 knot sailing speeds.

The fully integrated hybrid system will allow you to depart the dock, enjoy a day of sailing and return to the dock without ever having to listen to a diesel motor. Better yet, you can enjoy a tropical night at anchorage with 30,000 BTU of air-conditioning without the noise of a generator.

Completed in 2015 – “Extreme H2O” has already raced to Mexico and Hawaii and back and is fully serviced with a new 3Di raw racing mainsail a new R1 reacher and ready for racing and cruising in the Caribbean in 2017.

Design Philosophy:

“Extreme H2O” is the first Gunboat 66 to place an emphasis upon performance cruising
catamarans. A product of the Morrelli & Melvin Design & Engineering office, “Extreme H2O” was optimized for performance throughout a wide range of wind conditions. You can enjoy sailing at over 9 knots of boat speed in only 8 knots of wind on “H2O” which is unheard of on other comparably sized catamarans.

This powerful sail plan is managed with advanced sail handling systems in both the forward cockpit with 4 high speed hydraulically driven winches and at all steering stations with push button mainsail controls. In addition, the mainsheet traveler is curved along the length of the aft beam for optimum mainsail control and safety. The running sails are all controlled through bottom up or top down furling and the mainsail is reefed with state of the art locks at the head and clew.

Design evolution:

Morrelli & Melvin designed the “C” foils to provide up to 4,000 kg of vertical lift and the “T” rudder to reduce pitching when the wave angle is forward of the beam. The “T” foils are removable while boat is in the water so the boat can be easily configured for optimum speed and comfort.

Construction:
“Extreme H2O” began construction in South Africa by Gunboat. After the Gunboat facility shut down, the boat was moved to the US and completed by Westerly Marine - a custom boat builder located in Santa Ana, California. Westerly Marine specializes in carbon fiber performance vessels. Over 56,000 hours were required to complete the boat to certified standards.

Hulls: Carbon inner skin and outer skin / 25mm Corcell Sandwich
Cabin: Carbon inner and outer skin / Nomex honeycomb and Corcell sandwich
Cabin soles: Carbon / Nomex honeycomb sandwich
All secondary taping Carbon fiber / Epoxy and post cured
All laminates vacuum-bagged and post cured

Design Philosophy:

“Extreme H2O” is the first Gunboat 66 to place an emphasis upon performance cruising
catamarans. A product of the Morrelli & Melvin Design & Engineering office, “Extreme H2O” was optimized for performance throughout a wide range of wind conditions. You can enjoy sailing at over 9 knots of boat speed in only 8 knots of wind on “H2O” which is unheard of on other comparably sized catamarans.

This powerful sail plan is managed with advanced sail handling systems in both the forward cockpit with 4 high speed hydraulically driven winches and at all steering stations with push button mainsail controls. In addition, the mainsheet traveler is curved along the length of the aft beam for optimum mainsail control and safety. The running sails are all controlled through bottom up or top down furling and the mainsail is reefed with state of the art locks at the head and clew.

Design evolution:

Morrelli & Melvin designed the “C” foils to provide up to 4,000 kg of vertical lift and the “T” rudder to reduce pitching when the wave angle is forward of the beam. The “T” foils are removable while boat is in the water so the boat can be easily configured for optimum speed and comfort.

Construction:

“Extreme H2O” began construction in South Africa by Gunboat. After the Gunboat facility shut down, the boat was moved to the US and completed by Westerly Marine - a custom boat builder located in Santa Ana, California. Westerly Marine specializes in carbon fiber performance vessels. Over 56,000 hours were required to complete the boat to certified standards.

Hulls: Carbon inner skin and outer skin / 25mm Corcell Sandwich
Cabin: Carbon inner and outer skin / Nomex honeycomb and Corcell sandwich
Cabin soles: Carbon / Nomex honeycomb sandwich
All secondary taping Carbon fiber / Epoxy and post cured
All laminates vacuum-bagged and post cured

Sail Inventory

All Sails by North Sails:

Mainsail #1: 186m2, 3Di, 760i (37,200 dpi) with 2 offshore plys, 3 reefs, 6 full C-Tech carbon battens

Mainsail #2 (new Jan 16) 193m2, 3Di, 870 RAW, 2 offshore plys, 3 reefs, 5 full C-Tech carbon battens

Fractional screacher 106m2, 3Di, 760i, RAW, 19,600 dpi, on vectran luff cable

Mast Head screacher 150m2, 3Di, 760i RAW on vectran luff cable for bottom up furling

Solent: 72m2, 3Di 760i (39,800 dpi), Hank On,

Staysail: 41m2, 3Di 760i (35,000 dpi) roller furling on Vectran luff cable

MH0 reacher: 265m2, 3Di 760, 16,800 dpi, internal aramid luff cable for bottom up furling

R1 (New Jan 16): 3Di 87 Raw, 8820 Dpi, internal luff cable, top down furling

A3: 350m2, laminate, designed for external aramid luff cable for top down furling.

A4: 400m2, SK150, designed for external luff aramid luff cable, top down furling

A1: 358m2, NDPO 69/49 (polyester) designed for external aramid luff cable, top down furling

Fractional reacher: 186m2, 3Di, 16,800 dpi, internal aramid luff cable bottom up furling

Rigging

Mast, Boom, Forward Beam and Longeron Prepreg Carbon by Southern Spars New Zealand,

Standing Rigging is EC6 by Composite Rigging,

Running backstay are aramid

Electronics

WTP3 processor

Forward cockpit - with 4qty 20/20 displays and 2 qty race displays all mounted on mast

Main cabin 1qty graphic display at Nav station and 1 qty graphic display in inside helm

Aft cockpit 4 qty race displays

1 x H5000 barometer module

1 x H5000 3D motion sensor

1 x BB&G 57” mast wand

1 x celesco String Pot for mast rotation sensor

1 x celesco string Pot for rudder position

1 x Simrad GS70 GPS

1 x Furuno GP33 GPS

1 x Furuno FA 150 AIS transponder and display

1 x Icom M400BB VHF with integrated AIS antenna

2 x Standard HX290 protable VHF

1 x B&G 4G Radar

1 x F250 Sat Com

2 x Naauticomp 15” sunlight Monitors

2 x Intense PC, window 7, RAM 8GB, Core 1.8GHz

2 x copies of Expedition software

1 x copy of Deckman software

2 x NavNet 3D Vector MapMedia US West Coast and Hawaii Charts

1 x Globe Surfer Quad band 3G

Cell phone receiver

1 x Wave Wifi booster for onboard wifi

1 x B&G H5000 Autopilot Computer & Controller located at interior helm

1 x Raymarine Type 3 linear drive hydraulic drive

1 x headstay load cell

2 x shroud load cell

1 x mainsheet load cell

C-Zone CAN-Bus control for non-critical electrical systems

Electrical

Hybrid system;

2 x 4 cylinder Volvo D2-40 20kW generators, output of 260 – 320 VDC

2 x AC High efficiency Fukuta motors with 25kW continuous and 40kW peak power, 3 phase, liquid cooled

2 x AC motor Traction Controller, liquid cooled, DC input, AC motor output

1 x LiFePo4 Battery Bank, 288 volt nominal, 28.8kWh, 11 enclosures, 8 cells per enclosure

1 x 4kW AC/DC shore power battery charger

2 x 250 - 320 VDC to 24 volt charger

1 x 100 – 400 VDC to 12 volt charger

1 x 250 – 320 VDC to 230 VAC inverter – liquid cooled to run all appliances (AirCon, microwave, refrigeration)

2 x 20 Gal Torrens Water heater (Heated by engine and AC)

110VA C Sockets in all Cabins and Heads

Plumbing

1 x 100 gallons Water 2 x 75 gallons Fuel

3 x 20 gallons Holding Tank

1 x 15 gallon sweet water tank

2 x 18 gallon hot water tanks AC or engine heated.

1 x Spectra Cape Horn water maker plumbed to a 15 gallon stand alone sweet water tank

Presented By
Florida Coast Marine - FP
Harbortown Marina
2010 Harbortown Drive - Suite O
Fort Pierce, Fl 34946
United States
Office: 772-489-0110
Fax: 772-489-5888
Email Us

Brokered By
No Picture Available
-
Cell: -
Office: -
Fax: (No information)

2010 Harbortown Drive Harbortown Marina Suite O
Fort Pierce, FL 34946
Office 772-489-0110
Fax 772-489-5888
Palm Beach, FL 33401
Dennis Kennedy, CPYB
561-756-BOAT (2628)
Fax 561-624-0242
Powered by Yatco.com